Samsung Reference Information free download

File name Reference Information.pdf

Reference Information 14. Reference Information 14-1 Connection to a 3rd Party Device Notice: 1. Do not connect to the power source until all connections are done, as this will cause damage to the product. 2. Make sure the sound port is properly connected (right: red, left: white). 14-1-1 Connecting to an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor aerial A cable television network A satellite network 1 In the first three cases, connect the aerial or network input cable to Rear of the TV the ANT IN jack on the rear of the television. 2 If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp or and clear. For further details, refer to: "Storing Channels Automatically" on page 17 Cable Television "Storing Channels Manually" on page 18 Network When installing or re-installing your TV, be sure to use the supplied coaxial antenna cable. If you connect using a different coaxial cable, there is risk of noise or interference to the screen image. (You must not use another general purpose cable. Use the 3M/5M/7M cable supplied by Samsung.) 14-1-2 Connecting a Satellite Receiver or Decoder In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to Rear of the TV descramble a coded transmission signal, you must connect a decoder to the rear of TV. Using a SCART cable Connect the receiver (or decoder) SCART